As an Amazon Associate, We earn from qualifying purchases at no added cost to you.
best-solvent-for-removing-carbon

Best Solvent for Removing Carbon – [Top 8 Out of 2337 ] Review & Buying Guide [2021]

Carbon is a by-product of all combustion reactions. You can't prevent it from depositing in your engine, kitchen appliances or any metal stuff under high temperature. At first, the deposition may not seem that much of a problem. But over time, it becomes a severe hindrance to the performance of the object in question.

A shallow layer of carbon can be removed easily by the use of soap. But as the layers get thicker, such a thing becomes impossible. That's why to remove those carbon depositions, you need to use carbon removers. But we believe you should not use anything but the best solvent for removing carbon.

Take a look at our selection, and we can guarantee that you won't be disappointed. These products will remove carbon from the metal surface as smoothly as a hot knife cuts through butter.

Check our top 3s if you're in a hurry, pick your one right from the table below. Anyone of these will satisfy your preference.

Best Solvent for Removing Carbon Review

As carbon deposition occurs for engines, kitchen appliances, gun barrels and so on, there are tons of different carbon removers. This means finding the best one might be a tedious task. To make sure you get the best, we have gathered the eight best carbon removers you may find in the market. We judged them based on their ability and sector of use.

1.Discovery Products Carbon Off Cleaner remover

The biggest problem you'll face due to carbon deposits on kitchen appliances is that the pan or stove won't work correctly. And to help you get rid of this problem, Discovery Products has the best solvent for removing carbon.

Their Carbon Off Cleaner is by far the best spray carbon cleaner that can get rid of the carbon. Each of the 19 ounces can has a potent solution for removing the carbon deposits but won't harm your metal appliances.

Specialized Department

This product uses a solution that's optimized for kitchen use. You can use it to remove carbon from the stovetop and other cooking utensils. Moreover, the potency is good enough that you can use it to clean a metallic chimney. But sadly, it isn't suited for removing carbon from automotive parts.

What Sets This Apart

  • The solvent is available in a spray can
  • Mixing the solvent with water can help you regulate its potency
  • It works within fifteen minutes of being applied
  • Carbon is removed as soon as one washes the solvent off with cold water

Benefits

  • Spray can type packing makes it easier to be applied
  • Rinsing with cold water while scrubbing with a brush gives the best result
  • The form factor of the can is small for more accessible storage
  • Solvent can be left overnight, but it still won't damage the metallic surface

Drawbacks

  • As the potency is low, it can't be used for automotive parts
  • Water is needed to rinse off the solvent

Verified User Review

This is one of the rare cases where we can proudly say that this product is as good as it claims to be. It can clean anything as long as it's within the limits of your kitchen. But be sure to use protective gear like glasses to prevent them from getting into your eyes.

Verdict

Discovery Products are a well-known name for their general home products. Their Carbon Off Cleaner is one such product that backs up their claim of being the best. The solvent used by them is perfect for any kitchen carbon removal.

2.Slip 2000 Carbon Killer

Removing carbon isn't always a tedious task. Sometimes it is a task that'll take you five minutes as max. and the solvent that you'll have to use to achieve such a result is the Slip 2000 Carbon Killer.

This solvent is designed for the task of removing heavy carbon fouling. Take the part that you want to clean and submerge it in the solvent. Give it five to fifteen minutes, and then take it out. Wipe it, and viola, it will sparkle as good as new.

Specialized Department

The potency of the solvent used for Carbon Killer is very high. It is this high potency that lets it clean the carbon deposits within five minutes. That's why you can use this solvent for almost anything. That's considering the materials are made of metal. So, feel free to use it for metallic kitchen appliances and automotive parts.

What Sets This Apart

  • This solvent is by far the most potent one on the list
  • It works within five minutes, so there's no need to keep it soaked overnight
  • Can be used to remove carbon from any metallic surface
  • The solvent is non-flammable and also biodegradable

Benefits

  • You can use the solvent multiple times
  • Solvent isn't flammable or toxic
  • Treated parts are useable as soon as the treatment is done
  • Odorless solvent makes it leave zero footprints after use

Drawbacks

  • The solvent being too potent, so it dissolves all except metal
  • Not to be used on external parts of a firearm or non-metallic parts

Verified User Review

Believe us when we say that this is a solvent that can dissolve all! Though the name is Carbon Killer, it can also kill lead and plastic. Such a property makes it harder to use on cooking utensils and appliances. You are also required to pre-clean the carbon cake if there are any.

Verdict

The Carbon Killer from Slip 2000 is an excellent carbon remover. But due to its extreme potency, it is a bit hard to handle. Using it is easy enough, but it may damage the object if left for more than fifteen minutes. If you are cautious enough, you can use this solvent to get rid of your carbon problems.

3.BORE TECH ELIMINATOR BORE CARBON CLEANER REMOVER

With dropper-type packaging, Bore Tech Eliminator Bore Cleaner is one of the best carbon removers for bore cleaning.Also, they use their patented revolutionary formula to eliminate carbon soot in the fastest possible way.

Apply the solvent via the dropper or submerge the entire carbon deposited part into the solvent and wait for a few minutes. This will clear up the soot and leave behind the shiny metal surface. This formula is so off the charts good as it can remove the carbon in a matter of minutes.

Specialized Department

Although it’s a dedicated Bore product, it is perfect for cleaning gun barrels. It dissolves not only the carbon but also the copper fouling. It completely dissolves the useless carbon buildup. Large volumes of this solvent can slightly clean kitchen appliances and few automotive parts. But it is ineffective against a large volume of carbon deposition.

What Sets This Apart

  • Fast-acting patented formula makes it one of a kind
  • The formula is potent but not too powerful to damage the barrel
  • It is a rare ammonia-free Bore cleaner
  • Can be used on automotive parts but up to a certain extent

Benefits

  • Doesn't harm or etch the gun barrel no matter how long it is submerged
  • Short-term rust prevention formula is included in the solution
  • Biodegradable and odorless solvent
  • Corrosive salts help neutralize the solvent

Drawbacks

  • The solvent damages phosphate barrels
  • It can't be used to clean engine carbon

Verified User Review

If you hate cleaning gun barrels, then a word of warning, this solvent will make you fall in love with the task. Take our word for it. The procedure is easy and quick. Just soak the barrel with the solvent and wipe it off after fifteen minutes.

Verdict

Bore Tech has made its name in the barrel cleaning sector with this particular product. So, this is undoubtedly the best product to clean your gun barrels. But for other carbon removal tasks, we suggest you chose a different solvent.

4.Techron Concentrate Plus Complete Fuel System carbon Cleaner

Techron is known for its patented fuel additive technology. This technology is something that not only cleans your engine but the entire system. The best of their product is the Techron Concentrate Plus which entirely removes the carbon buildup.

Once it is used, the entire fuel system will be free of any carbon layers. By doing so, it will also lower the rate of future carbon deposition. This will make your car run smoother because we all know how much hindrance carbon buildup is for your engine.

Specialized Department

The solvents formulated by Techron are aimed explicitly at engines. This is a solution that you'll have to apply to the fuel tank. It flows through the system and dissolves the unwanted carbon layers.

bjects.

What Sets This Apart

  • Patented formula used by them requires no water wash
  • Removes not only the carbon but also the accumulated grease
  • Works for all types of engines
  • MPG of the machine is optimized after cleaning

Benefits

  • Cleans the entire fuel system
  • Rough idle and spark fouling are reduced when used
  • Increases the fuel stability
  • Boosts the engine's performance

Drawbacks

  • Can't be used for cleaning other materials
  • Using it to clean a specific part is impossible

Verified User Review

No matter the model of your vehicle, this is the solution to your carbon fouling problems. We can say this because we used it. The application procedure is easy and works very fast. You just apply it and drive the car. There's no need to wash or wait for the solvent to do its magic.

Verdict

Techron has this unique product formula patented under its name. It is a good thing for this is a formula that can clean your engine, dissolves all the deposited carbon buildups  and give it a new life. Techron Concentrate Plus Complete Fuel System Cleaner, unlike other products in the article, cleans the carbon inside out.

5. Piston Kleen Carbon Remover

For automotive parts, carbon isn't the only thing that sets on metallic surfaces. Keeping that in mind, Piston Kleen has devised the safest solution for cleaning your engine.

This solvent is effective against carbon, grease, oil, and soil that can accumulate over and inside the motor over time. It is so effective the carbon buildup on U.S. Army vehicles is removed with this solvent.

Specialized Department

This solvent is engineered to remove baked-carbon and burnt-on carbon deposits from engine parts like pistons and cylinders. Even the nastiest buildup can be removed by extending the soak time. But sadly, this potency makes it unsuitable to be used on kitchen accessories. However, it can be used for firearms and other rigid metallic objects.

What Sets This Apart

  • You can use the solvent on almost all metal surfaces
  • There's no risk of fire hazard
  • No extra precautions are required while using
  • Solvent is potent when submerged, but it can also be applied to the carbon

Benefits

  • Non-toxic and biodegradable solvent
  • Multi-metal objects remain unharmed
  • Non-hazardous nature makes it easy to handle
  • Soak time is dependent on the carbon buildup

Drawbacks

  • Too potent for removing regular carbon deposits
  • Tracking the soak time is a must

Verified User Review

Removing carbon with solvent of such potency is as easy as taking candy from a baby as long as enough soaking time is given. But we found that the strength of the solvent is dependent on temperature. Higher temperatures increase the potency and lessen the soak time. Once soaked, you just need to brush it with fine steel wool, and the harshest carbon buildup will disappear.

Verdict

Carbon deposits on firearms and engine parts are the most suborn. And removing them takes a lot of work. But with Piston Kleen, the carbon can be removed with ease.

6.Subaru Genuine SOA868V9165 Carbon clean remover

Not all carbon removal solvents are aimed for wide-area applications. Subaru Genuine, with such a line of thought, has manufactured the SOA868V9165 Carbon Clean.

This product is aimed toward wide-area usage. You can use it to get rid of carbon soot from any metallic surface, no matter how big it is. Soak it in the solvent and watch the magic.

Specialized Department

Combustion chambers of the engine are the perfect section where you can use this remover. But that doesn't mean it is limited to this section only. The fuel system components are also a prime sector of application. However, it is recommended not to be used for shallow carbon deposits.

What Sets This Apart

  • Product is aimed for wide-area application
  • Bottle type packing is perfect for spreading over the metallic object
  • Perfect for carbureted or fuel-injected engines
  • Improves the engine health drastically

Benefits

  • Engine capabilities are boosted after use
  • Carbon knock from the engine is entirely eliminated
  • Cleans the exhaust system thoroughly
  • Other impurities like emulsifiers and lubricants are also dissolved


Drawbacks

  • External tools like Top Engine Cleaner Tool are required
  • Can't be used for gun barrel cleaning

Verified User Review

Our experience says that this product deals with almost all carbon depositions on engine parts. But the fact that an external tool is a prerequisite for its use isn't the optimal solution. However, if you already own such a tool, then this solution will clean your engine thoroughly.

Verdict

Cleaning the engine is the most complex task. And if it's clogged with baked carbon, then the difficulty is tuned up many folds. With the Subaru Genuine SOA868V9165 Carbon Clean, the task becomes that much easier.

7.GKG KG Industries - KG-1 Carbon Remover

In the shooting sector, the name of GKG is a well-known and respected one. Their KG-1 is the very first product that addresses the carbon buildup within gun barrels. With the ammonia-free solvent, you can easily clean your gun. This will increase your gun life and also make you a better shooter. Another benefit this product bears is its ease of use and rapid action nature.

Specialized Department

GKG products are mainly aimed at gun-related problems, and the KG-1 doesn't break this tradition. It is the perfect solvent for all forms of guns. Rimfire, automatic, powdered, centerfire, gas-assisted firearms – all will be carbon-free with this solvent. But using this solvent for other purposes is impossible.

What Sets This Apart

  • Removes carbon buildup quick and easy
  • It sets up the gun for heavier carbon cleaning
  • A solvent used by the professionals
  • Can be used for all types of firearms

Benefits

  • Solvent is entirely void of ammonia
  • Application procedure is simple
  • Gets rid of shallow carbon deposits almost instantaneously
  • Extends the barrel life for all guns

Drawbacks

  • Doesn't clear the carbon if the buildup is too dense
  • Can't be used for removing carbon from other materials

Verified User Review

We can safely say that this the solvent that you must get if you want to protect your gun. This solvent cleans shallow carbon soot with ease. But sadly, if the carbon deposition is heavy, this solvent becomes useless.

Verdict

Being the first of its kind isn't that much of an achievement. But this product is the first and also the best of its kind. Now that's a feat that will make anyone jealous. So, if you want to make sure your gun holds on for a long time, then be sure to use this carbon remover.

8.LAVR remover Carbon

"A solvent that's purely designed for your engine" is what describes this product. There are very few automotive workshop owners who don't know about the Russian motor decarbonizer LAVR. This product is loved by many. Each of the sixteen-ounce products is effective enough to eliminate the carbon deposit from any part of the engine. It's a product that's one of a kind. The reason behind its uniqueness isn't just the formula but also the way it is applied.

Specialized Department

Combustion chambers and fuel-injection parts are the primary aims of this solvent. But it's not limited to only these parts. Using this, one can clean piston rings and gun barrels.

What Sets This Apart

  • Using this increases the longevity of the engine
  • Additional tool required for the application is included with the product
  • Odorless solvent but leaves behind a sweet scent
  • Unique application procedure makes it versatile

Benefits

  • Decelerates the engine wear phenomenon
  • Easy to apply as the external tool is a syringe
  • Slows down future carbon buildup
  • Can be used for all types of engines

Drawbacks

  • Can't be used for kitchen appliances like stoves or oven
  • Applying the solvent is a bit tougher than usual

Verified User Review

We found that using the product is challenging as it requires a unique method. But once you get used to it, all seems manageable. You can use it for all types of engines, but it is recommended not to use it for machines that require significant repairs.

Verdict

Being a Russian product, many might be skeptical about its performance. And the unique application procedure may give you a negative vibe. But once you get used to it, this will become your favorite engine carbon cleaner.

 

Things To Consider Before Buying a Solvent for Removing Carbon

Removing the visible carbon deposits isn't that tough. The hard part is getting rid of the hardened carbon cake. So if you want to remove them, then using the carbon cleaner is a must. But before you get one, take a look at things you need to look out for before you buy.

Object of Application

Carbon soot can form on any surface as long as combustion is occurring near it. So no matter if it's a kitchen appliance or a gun barrel, it will get the signature black layer over time. But not all carbon removers are versatile to be used in all materials. So make sure to buy the product that suits your need.

Process of Application

Solutions for carbon removal can be applied in many forms. Some are concentrated liquid, while some are like spray liquid. Then again, some are foam type while others are paste-like. So, make sure you get the carbon remover that suits your application process. Otherwise, you might have to get extra tools to get the job done.

Time Required

Some solvents work instantly, while some require overnight soaking. The time required depends on the amount of carbon buildup. In most cases, a shallow layer can be removed within five minutes. But sometimes, a carbon cake needs more than 24 hours. It is wise to get a potent enough solvent to do the job within the given timeframe.

Formula

Though most industrial-grade carbon removers use potent chemicals, not all are the same. In the case of the kitchen carbon cleaners, the formula used by them isn't that harsh. While for engine cleaning, the chemicals used are potent. Make sure to chose a carbon cleaner whose composition will be able to get the job done without damaging the object.

Safety

Not all chemicals are safe, neither are all chemicals harmful. Carbon removers are the same. Using the carbon cleaner that you used for your engine can't be used on your oven. That's not only for the difference potency but also for hazardous issues. Keeping this in mind, try to find a safe carbon remover that will get the task done.

 

FAQs

Are Carbon Removers Toxic?

Not all carbon removers use toxic components. Nowadays, most of the carbon remover that's publicly sold is free of toxins. This is to make sure that the solvent doesn't harm the environment.

What Is the Main Component for Carbon Removers?

Different carbon removers have different formulas. And most of them are patented by the manufacturing company. But there are a few components that are fixed no matter the brand. They are Acetone, Heptane, and Toluene.

What Will Happen If Carbon Sooth Is Not Removed?

Carbon soot is sure to form if combustion happens. This, in different cases, harm in different manners if not removed. But no matter what the object in question is, carbon deposition is sure to decrease the object's performance.

How Does Carbon Get on Stove and Oven?

For the oven and stoves, it may seem that there's no combustion reaction occurring. But that's not the actual case. In both cases, the metallic surface gets heated. When these heated surfaces come in contact with any carbon-based material, carbon soot is formed over it.

Can A Gun Barrel Be Damaged with Carbon Remover?

Using a gun will surely leave lead and carbon deposits inside the barrel. When carbon removers are used to clean it, the carbon and lead bits get dissolved in it. The barrel remains intact as long as the soaking time for the barrel is regulated.

 

Final Words

Finding a carbon remover isn't that arduous task. But getting a remover that suits your needs, now that's near impossible. Before removing carbon, there's one thing that you need to know about carbon formation.

Carbon deposits are a by-product of all forms of combustion. So, no matter how much you wish, you'll never be able to get rid of the source of the problem. As long as there's combustion occurring, you'll have to deal with the by-product.

However, this is considering that you didn't read our article. Once you are done with our article, you'll overcome this problem with ease. The report not only covers the best solvent for removing carbon but also helps you find the one that suits your needs.

Leave a Reply